Ro-ràdh
The AEG PST 500 X Jigsaw is a robust and versatile electric power tool designed for cutting various materials, primarily wood. Featuring a powerful 440-watt motor and the convenient Fixtec blade change system, this jigsaw offers efficient and precise cutting performance. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your AEG PST 500 X Jigsaw. Please read these instructions carefully before operating the tool and keep them for future reference.
Stiùireadh Sàbhailteachd Coitcheann
Always follow basic safety precautions when using electric power tools to reduce the risk of fire, electric shock, and personal injury.
- Sàbhailteachd san raon obrach: Cùm an raon obrach agad glan agus le deagh shoillseachadh. Bidh àiteachan làn sgudail no dorcha a’ toirt cuireadh do thubaistean. Na cleachd innealan cumhachd ann an àile spreadhaidh, leithid nuair a bhios lionntan lasanta, gasaichean no duslach ann.
- Sàbhailteachd dealain: Feumaidh plugaichean innealan cumhachd a bhith a rèir an t-socaid. Na atharraich am pluga ann an dòigh sam bith. Seachain conaltradh bodhaig le uachdaran talmhaichte leithid pìoban, rèididheatoran, àmhainnean agus fridsichean.
- Sàbhailteachd Pearsanta: Cuir ort dìon-sùla an-còmhnaidh. Cleachd dìon-èisteachd nuair a bhios tu ag obair airson ùine mhòr. Cuir ort aodach ceart; seachain aodach no seudaireachd sgaoilte. Daingnich falt fada.
- Cleachdadh agus cùram innealan: Na cuir feachd air an inneal cumhachd. Cleachd an inneal cumhachd ceart airson an tagraidh agad. Dì-cheangail am pluga bhon stòr cumhachd mus dèan thu atharrachaidhean sam bith, mus atharraich thu goireasan, no mus stòraich thu innealan cumhachd.
- Sàbhailteachd sònraichte airson Jigsaw: Dèan cinnteach gu bheil am pìos obrach gu tèarainte clamped. Keep hands away from the cutting area. Wait for the blade to stop completely before setting the tool down.
Bathar seachadview
Familiarize yourself with the components of your AEG PST 500 X Jigsaw.
Figear 1: Aghaidh view of the AEG PST 500 X Jigsaw, highlighting the motor housing and blade area.
Figear 2: Taobh view of the AEG PST 500 X Jigsaw, showing the handle and power cord connection.
Prìomh fheartan:
- Motair cumhachdach 440 Watt: A 'toirt seachad ampcumhachd airson diofar ghnìomhan gearraidh.
- Fixtec Blade Change System: Allows for quick and tool-free blade replacement.
- Plàta Bonn Atharrachail: Enables horizontal adjustments for bevel cuts up to 45 degrees.
- Dà-Stage Pendulum Action: Selectable pendulum stroke for optimized cutting performance and cleaner results across different materials.
- Port Tarraing Duslach: For connecting a dust extraction system to keep the work area clean.
Suidhich
1. A’ stàladh lann an t-sàbhaidh
- Ensure the jigsaw is disconnected from the power supply.
- Locate the Fixtec blade clamp innleachd.
- Brùth an lann clamp lever or button (refer to specific tool design) to open the clamp.
- Insert the saw blade into the blade holder with the teeth facing forward. Ensure the blade is fully seated.
- Sgaoil an lann clamp lever/button to secure the blade. Gently pull on the blade to confirm it is firmly locked in place.
2. A’ gleusadh a’ phlàta bonn airson gearraidhean beibheil
- Dì-cheangail an inneal bhon t-solar cumhachd.
- Loosen the screws or lever that secure the base plate.
- Tilt the base plate to the desired angle for bevel cuts (up to 45 degrees). Use the angle scale for precision.
- Tighten the screws or lever firmly to secure the base plate in position.
- Always perform a test cut on scrap material to verify the angle before cutting your main workpiece.
3. A ’ceangal ri cumhachd
- Ensure the power switch is in the "OFF" position before plugging in the tool.
- Connect the power cord to a suitable 220 Volt AC power outlet.
Stiùireadh Obrachaidh
1. A ’toirt cumhachd air / dheth
- To start the jigsaw, press the power switch.
- To stop the jigsaw, release the power switch. Note: Some models may have a lock-on button for continuous operation, which must be disengaged to turn off the tool.
2. Selecting Pendulum Action
An dà-stage pendulum action allows for faster cutting in softer materials and cleaner cuts in harder materials.
- Higher Pendulum Setting: For faster, more aggressive cuts in wood and softer materials. This setting may result in a rougher cut edge.
- Lower/No Pendulum Setting: For finer, cleaner cuts in wood, plastics, and metals. This setting is slower but provides better control and finish.
- Adjust the pendulum setting using the dedicated lever or dial on the tool.
3. Teicneòlasan gearraidh
Dèan cinnteach an-còmhnaidh gu bheil am pìos obrach air a cheangal gu tèarainteamped gus casg a chuir air gluasad rè gearradh.
Figure 3: User demonstrating cutting a wooden board with the AEG PST 500 X Jigsaw.
Figure 4: Close-up of the AEG PST 500 X Jigsaw in action, performing a cut on wood.
- A’ tòiseachadh air gearradh: Place the front edge of the base plate flat on the workpiece. Start the tool and allow the blade to reach full speed before slowly guiding it into the material along your marked line.
- Gearraidhean Dìreach: Maintain steady pressure and guide the tool smoothly along the cutting line. For long straight cuts, consider using a straight edge guide (not included).
- Gearraidhean Lùb: Use a narrower blade for tighter curves. Guide the tool slowly, allowing the blade to follow the curve without forcing it.
- Gearraidhean Bevel: After adjusting the base plate angle (as described in Setup), proceed with cutting as usual, ensuring the base plate remains flat on the workpiece.
- Gearraidhean Plunge: For internal cuts without a pilot hole, tilt the tool forward so the front edge of the base plate rests on the workpiece. Start the tool, then slowly lower the rear of the base plate until the blade plunges through the material.
Cumail suas
Regular maintenance ensures the longevity and optimal performance of your jigsaw. Always disconnect the tool from the power supply before performing any maintenance.
- Glanadh: Regularly clean the ventilation openings and the blade area to prevent dust buildup. Use a soft brush or compressed air. Do not use water or solvents.
- Ath-chur lann: Replace dull or damaged blades promptly. Refer to the "Installing the Saw Blade" section for proper procedure.
- Corda cumhachd: Inspect the power cord for any damage before each use. If damaged, have it repaired by a qualified service technician.
- Stòradh: Stòraich an t-inneal-sgriobhaidh ann an àite tioram, sàbhailte, a-mach à ruigsinneachd chloinne.
Fuasgladh thrioblaidean
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Chan eil an inneal a’ tòiseachadh. | Gun sholar cumhachd; càball cumhachd lochtach; suidse lochtach. | Thoir sùil air an t-socaid cumhachd agus an càball. Ma mhaireas an duilgheadas, cuir fios gu seirbheis. |
| Chan eil an lann a’ gearradh gu h-èifeachdach no a’ ceangal. | Dull or incorrect blade; excessive feed pressure; incorrect pendulum setting. | Replace blade. Reduce feed pressure. Adjust pendulum setting. |
| Cus crith. | Lann sgaoilte; lann millte; pàirtean a-staigh caite. | Ensure blade is securely installed. Replace blade. If problem persists, contact service. |
| Gearraidhean mì-chruinn. | Loose base plate; incorrect blade; workpiece not secured. | Tighten base plate. Use appropriate blade. Secure workpiece firmly. |
Sònrachaidhean
| Feart | Mion-fhiosrachadh |
|---|---|
| Brand | AEG |
| Modail Àireamh | 4935428260 (PST 500 X) |
| Stòr cumhachd | Electric Corded |
| Dètage | 440 watt |
| Voltage | 220 Volt |
| Luas | 3700 rpm |
| Fad Stròc | 15 mm |
| Stuth lann | Aluminum, Metal, Steel |
| An uachdar a thathar a ’moladh | Fiodh |
| A ’gearradh ceàrn | Suas gu 45 ceum |
| Meudan toraidh (L x W x H) | 29L x 19B x 9H centimeters |
| Cuideam nì | 2.88 cileagram |
| Feartan sònraichte | Saw blade included, Dust extraction connection |
| Teisteanasan | CE |
Note: The specification for "Included components: Battery" in the source data appears to be an error, as this is a corded electric tool and operates via an electrical cable.
Barantas agus Taic
Fiosrachadh Barantais
The AEG PST 500 X Jigsaw comes with a Barantas cuibhrichte. Please refer to the warranty card included with your product for specific terms and conditions, including coverage duration and limitations.
Pàirtean a bharrachd rim faighinn
Spare parts for this product are available in the EU for a period of 5 bliadhna bhon cheann-latha ceannach.
Taic Luchd-cleachdaidh
For technical assistance, service, or warranty claims, please contact AEG customer support. Contact information can typically be found on the AEG official website or on the product packaging. When contacting support, please have your model number (PST 500 X or 4935428260) and purchase date available.