1. Ro-ràdh
The AmScope D120A-MS is a dual-view compound monocular microscope designed for high magnification observation in biological and educational applications. It features a versatile viewing head, multiple objective lenses, Brightfield illumination, and a mechanical stage for precise specimen manipulation. This manual provides essential information for the proper setup, operation, and maintenance of your microscope.
2. Stiùireadh Sàbhailteachd
- Always handle the microscope with care. Avoid sudden movements or impacts.
- Dèan cinnteach gu bheil am miocroscop air uachdar seasmhach, rèidh gus casg a chur air tuiteam.
- Connect the power cord to a grounded electrical outlet of the correct voltage (110V).
- Do not touch optical surfaces with bare hands. Use lens paper or a soft, lint-free cloth for cleaning.
- Unplug the microscope from the power source before cleaning or performing any maintenance.
- Keep the microscope away from direct sunlight, high temperatures, dust, and corrosive chemicals.
- Supervise children or inexperienced users to ensure safe operation.
3. Pasgan-susbaint
Fosgail na pàirtean uile gu faiceallach agus dèan cinnteach gu bheil na nithean a leanas ann:
- AmScope D120A-MS microscope with mechanical stage
- WF10x eyepiece
- WF16x eyepiece
- 4x DIN achromatic objective
- 10x DIN achromatic objective
- 40xS DIN achromatic objective (spring-loaded)
- 100xS (oil) DIN achromatic objective (spring-loaded)
- (2) Color filters
- bulb a bharrachd
- Còmhdach dust
- Leabhar-làimhe stiùiridh (an sgrìobhainn seo)
4. Comharrachadh Com-pàirt
Familiarize yourself with the main parts of your AmScope D120A-MS microscope:
Figear 4.1: Thairisview of the AmScope D120A-MS microscope. This image displays the complete microscope assembly, including the base, stage, objective lenses, and dual-view monocular head.
- Eyepiece (Ocular): Càit a bheil thu a’ coimhead view the specimen. The D120A-MS includes WF10x and WF16x eyepieces.
- Monocular Viewsa Cheann: The upper part of the microscope containing the eyepiece tube. This model features a dual-view head with a fixed 45-degree inclined tube and a vertical port.
- Sròn-phìos rothlach: A’ cumail nan lionsan amas agus a’ leigeil le atharrachadh furasta eadar meudachaidhean.
- Lionsan amas: The primary magnification components (4x, 10x, 40xS, 100xS oil).
- Meacanaigeach S.tage: A platform where the specimen slide is placed, with controls for precise X-Y movement.
- Stage Criomagan: Secure the specimen slide on the mechanical stage.
- Cnap Fòcas Garbh: Large knob for rapid focusing adjustments.
- Cnap Fòcas Mìn: Small knob for precise focusing adjustments.
- Soilleireadair (Stòr Solais): Located beneath the stage, provides light for viewing. This model uses variable-intensity tungsten illumination.
- Abbe Condenser: Located below the stage, focuses light onto the specimen. Features a 1.25 NA and an iris diaphragm.
- Diaphragm Iris: Controls the amount of light passing through the specimen.
- Bun-stèidh: The stable bottom support of the microscope.
5. Co-chruinneachadh agus Setup
Follow these steps to set up your microscope for initial use:
- A' dì-phapadh: Carefully remove the microscope and all accessories from the packaging. Retain the original packaging for future transport or storage.
- Suidheachadh: Place the microscope on a sturdy, level surface, away from vibrations and direct sunlight.
- Stàladh sùil-phìos: Insert the desired eyepiece (WF10x or WF16x) into the inclined eyepiece tube of the monocular head. Gently twist to secure it.
- Stàladh Amasan: The objective lenses are typically pre-installed. If not, carefully screw each objective into the revolving nosepiece in increasing order of magnification (4x, 10x, 40xS, 100xS). Ensure they are finger-tight.
- Ceangal cumhachd: Connect the power cord to the microscope's power input and then to a standard 110V electrical outlet.
- Còmhdach dust: Nuair nach eilear ga chleachdadh, còmhdaich am miocroscop leis a’ chòmhdach duslach a tha air a thoirt seachad gus a dhìon bho dhuslach is sprùilleach.
Figear 5.1: Faisg air làimh view of the objective lenses mounted on the revolving nosepiece. This image shows the 4x, 10x, 40xS, and 100xS (oil) objectives in position.
6. Obrachadh Bunaiteach
This section outlines the fundamental steps for observing specimens with your microscope.
- Cumhachd air: Flip the power switch located on the base of the microscope. The illuminator should light up.
- Atharraich an soillseachadh: Use the variable intensity control knob to set the desired brightness. Adjust the iris diaphragm on the Abbe condenser to optimize contrast and resolution for your specimen.
- Eisimpleir Àite: Rotate the revolving nosepiece to select the lowest power objective (4x). Lower the mechanical stage using the coarse focus knob. Place a prepared specimen slide onto the mechanical stage agus tèarainte e leis an stage criomagan.
- Eisimpleir Dreuchd: Cleachd na XY stage control knobs to move the slide until the area of interest is centered under the objective lens.
- A 'cuimseachadh:
- While looking through the eyepiece, slowly raise the stage a' cleachdadh an cnap fòcas garbh until the specimen comes into rough focus.
- Cleachd an cnap fòcas grinn to achieve a sharp, clear image.
- Meudachadh atharrachaidh: Once focused at low power, rotate the revolving nosepiece to switch to a higher power objective (e.g., 10x, 40xS). Due to the parfocal design, only minor adjustments with the fine focus knob should be needed to bring the image back into sharp focus.
- Using the 100xS Oil Immersion Objective:
- After focusing with the 40xS objective, rotate the nosepiece halfway between the 40xS and 100xS objectives.
- Place a small drop of immersion oil directly onto the center of the specimen slide where the light passes through.
- Carefully rotate the 100xS objective into the oil drop until it clicks into place. The objective should be immersed in the oil.
- Cleachd dìreach na cnap fòcas grinn to bring the image into sharp focus. Do not use the coarse focus knob with the 100xS objective.
- After use, clean the 100xS objective and the slide immediately with lens paper moistened with lens cleaning solution to remove all immersion oil.
- Dà-View Gnìomhachd: The vertical port on the monocular head can accept a second eyepiece for simultaneous viewing by another person or a camera mount for digital image capture (eyepiece and camera sold separately). Dioptric adjustment on the upright tube accommodates individual eye-strength differences.
Figear 6.1: The AmScope D120A-MS microscope demonstrating its digital image capture capability by connecting to a laptop. This setup utilizes the vertical port for a camera attachment.
7. Cumail suas agus Cùram
Proper maintenance ensures the longevity and optimal performance of your microscope.
- Glanadh Lionsan: Use only specialized lens paper and lens cleaning solution for optical surfaces. Gently wipe in a circular motion. Never use abrasive cloths or harsh chemicals.
- Glanadh coitcheann: Sguab corp a’ mhicreasgòip le clò bog, tioramamp clò. Seachain taiseachd a bhith a’ faighinn a-steach do phàirtean dealain.
- Stòradh: Always cover the microscope with the dust cover when not in use. Store it in a dry, dust-free environment.
- Ath-chur bulb: If the illuminator bulb burns out, unplug the microscope. Refer to the base of the microscope for access to the bulb compartment. Carefully replace the old bulb with the provided spare bulb, ensuring not to touch the glass part of the new bulb with bare hands.
- Pàirtean meacanaigeach: Do not attempt to lubricate or disassemble any mechanical parts. If issues arise, contact customer support.
8. A ’dèanamh trioblaid
Tha an earrann seo a’ dèiligeadh ri cùisean cumanta a dh’ fhaodadh tu a thighinn tarsainn orra.
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Gun soillseachadh | Power cord disconnected, power switch off, bulb burnt out | Check power connection, turn on switch, replace bulb |
| Tha an ìomhaigh doilleir no às aonais fòcas | Incorrect focus adjustment, objective not fully engaged, dirty lens | Adjust coarse/fine focus, rotate nosepiece until objective clicks, clean lenses |
| Raon dorcha view | Iris diaphragm closed, illuminator too dim, condenser too low | Open iris diaphragm, increase illuminator brightness, adjust condenser height |
| Duslach no spotan ann view | Dust on eyepiece, objective, or slide | Clean eyepiece, objective, or slide with lens paper |
| Cannot focus at 100x | No immersion oil, air bubbles in oil, coarse focus used | Apply immersion oil, remove air bubbles, use only fine focus |
9. Sònrachaidhean Teicnigeach
Detailed specifications for the AmScope D120A-MS microscope:
- Ceann: Compound dual-view monocular, 45-degree inclined, 360-degree rotatable
- Sùilean: WF10x, WF16x (with pointer)
- Amasan: 4X, 10x, 40xS (spring), 100xS (oil, spring) DIN achromatic
- Raon Meudachaidh: 40X - 1600X
- Stage: Meacanaigeach stage with X-Y axis movement, stagstad e
- Suidheachadh solais: Transmitted (lower)
- Condenser: Abbe, 1.25 NA
- Diaphragm: Iris diaphragm
- Stòr solais: Tungsten (incandescent), variable intensity
- Seòrsa soillseachadh: Brightfield
- Cumhachd: 110V
- Stuth: Metal, tungsten
- Meudan (H x W x D): 15 x 7.5 x 5.125 òirleach (tuairmse)
- Cuideam: 10 not
10. Barantas agus Taic Luchd-ceannach
For warranty information, technical assistance, or to purchase replacement parts, please contact AmScope customer support. Refer to the AmScope weblàrach-lìn no na sgrìobhainnean ceannach agad airson fiosrachadh conaltraidh gnàthach.