1. Ro-ràdh
Tapadh leibh airson ceannachasing the Sharp SPC106X LED Alarm Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new alarm clock. Please read these instructions thoroughly before using the device.
The Sharp SPC106X features a clear 1.0" blue LED display, an ultra-thin design, and essential alarm functions including snooze. It is designed for indoor use and operates electrically with battery backup capability.
2. Fiosrachadh Sàbhailteachd
- Stòr cumhachd: Cleachd an inneal-atharrachaidh cumhachd ainmichte a-mhàin. Dèan cinnteach gu bheil an tomhas-lìonaidhtagTha e co-chòrdail ris an t-solar cumhachd ionadail agad.
- Uisge agus Taiseachd: Na cuir an aonad fosgailte do uisge, taiseachd, no lionntan a’ sileadh/a’ frasadh. Na cuir nithean làn lionntan, leithid vasaichean, air an aonad.
- Fionnarachadh: Dèan cinnteach gu bheil fionnarachadh ceart ann. Na cuir bacadh air fosglaidhean fionnarachaidh.
- Teas: Cùm an aonad air falbh bho thùsan teas leithid rèididheatoran, clàran teas, stòbhaichean, no innealan eile (a’ gabhail a-steach ampliifiers) a bheir teas.
- Glanadh: Glan a-mhàin le clò tioram.
- Bataraidhean: If using backup batteries, ensure they are inserted with correct polarity. Remove batteries if the unit is not used for an extended period.
3. Pasgan-susbaint
- Sharp SPC106X LED Alarm Clock Unit
- Power Adapter (attached)
- Leabhar-làimhe cleachdaiche (an sgrìobhainn seo)
Note: Batteries are not included and must be purchased separately for backup functionality.
4. Toradh thallview
Familiarize yourself with the components of your Sharp SPC106X alarm clock:
Figear 1: Aghaidh View of Sharp SPC106X LED Alarm Clock. This image displays the front of the black alarm clock with a bright blue 1.0" LED display showing "12:01". Indicators for "PM" and "ALARM" are visible on the left side of the display. The "SHARP" logo is centered below the time. The clock features an ultra-thin design case and a stable base.
Smachdan agus comharran:
- 1.0" Blue LED Display: A’ sealltainn an àm làithreach agus àm an rabhaidh.
- Comharra PM: Lights up when the time displayed is PM.
- ALARM Indicator: Lights up when the alarm is set.
- Putan TÒRR: Air a chleachdadh gus an ùine làithreach a shuidheachadh.
- Putan ALARM: Air a chleachdadh gus àm an rabhaidh a shuidheachadh.
- Putan UAIR: Adjusts the hour for time or alarm settings.
- Putan MIN: Adjusts the minute for time or alarm settings.
- SNOOZE/DIMMER Button: Located on top, this button activates snooze during an alarm and adjusts display brightness.
- ALARM ON/OFF Switch: Located on the side, this switch enables or disables the alarm.
- LOUD/SOFT Switch: Located on the side, this switch adjusts the alarm volume.
- Roinn Bataraidh: Located on the bottom for backup batteries (not included).
5. Suidhich
5.1. Ceangal Cumhachd
- Unpack the alarm clock and its power adapter.
- Plug the power adapter into a standard household outlet. The LED display will illuminate.
- (Optional) For battery backup, open the battery compartment on the bottom of the unit and insert 2 AAA batteries (not included). This will preserve time settings during a power outage.
5.2. A’ suidheachadh an Ùine Làithreach
- Brùth agus cùm an AM FEAR-CIUIL putan. Tòisichidh na figearan uair a’ priobadh.
- Fhad 's a tha e a' cumail an AM FEAR-CIUIL putan, brùth air UAIR button repeatedly to advance to the correct hour. Observe the PM indicator for correct AM/PM setting.
- Fhad 's a tha e fhathast a' cumail an AM FEAR-CIUIL putan, brùth air MIN button repeatedly to advance to the correct minute.
- Sgaoil an AM FEAR-CIUIL putan. Tha an t-àm air a shuidheachadh a-nis.
6. Stiùireadh Obrachaidh
6.1. A ’suidheachadh an inneal-rabhaidh
- Brùth agus cùm an ALARM button. The alarm hour digits will begin to flash.
- Fhad 's a tha e a' cumail an ALARM putan, brùth air UAIR button repeatedly to set the desired alarm hour. Observe the PM indicator.
- Fhad 's a tha e fhathast a' cumail an ALARM putan, brùth air MIN button repeatedly to set the desired alarm minute.
- Sgaoil an ALARM button. The alarm time is now set.
6.2. A’ cur an inneal-rabhaidh an gnìomh/dì-ghnìomhachadh
- Gus an inneal-rabhaidh a ghnìomhachadh, sleamhnaich am putan ALARM AIR / OFF switch (located on the side) to the "ON" position. The ALARM indicator on the display will light up.
- Gus an inneal-rabhaidh a dhì-ghnìomhachadh, sleamhnaich am putan ALARM AIR / OFF switch to the "OFF" position. The ALARM indicator will turn off.
6.3. A’ cleachdadh an gnìomh Snooze
Nuair a chluinneas tu an inneal-rabhaidh, brùth air a’ phutan mhòr SNOOZE / DIMMER button on top of the clock. The alarm will temporarily pause and sound again after approximately 9 minutes.
6.4. Adjusting Display Brightness (Dimmer)
Brùth an SNOOZE / DIMMER button (when the alarm is not sounding) to cycle through different brightness levels (High, Low, Off) for the LED display.
6.5. Atharrachadh Meud an Alarma
Sleamhnachadh an LOUD/SOFT switch (located on the side) to select your preferred alarm volume level.
7. Cumail suas
- Glanadh: Sguab an aonad le clò bog, tioram. Na cleachd innealan-glanaidh sgrìobach no fuasglaidhean.
- Ath-nuadhachadh bataraidh: Replace backup batteries annually or when the display shows signs of dimming during power outagtha.
- Stòradh: Ma tha thu a’ stòradh a’ ghleoc airson ùine mhòr, thoir air falbh na bataraidhean cùl-taic gus casg a chuir air aodion.
8. A ’dèanamh trioblaid
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Tha taisbeanadh a’ chloca dheth. | Chan eil cumhachd no cumhachd agadtage. | Ensure power adapter is securely plugged in. Check household power. If using battery backup, ensure batteries are fresh and correctly inserted. |
| Chan eil an inneal-rabhaidh a’ fuaimeachadh. | Alarm is not activated or volume is too low. | Check if the ALARM ON/OFF switch is in the "ON" position. Verify the ALARM indicator is lit. Adjust the LOUD/SOFT switch to a higher volume. |
| Time/Alarm cannot be set. | Putanan gun a bhith air am brùthadh gu ceart. | Ensure you are pressing and holding the TIME or ALARM button while adjusting hours/minutes. Refer to sections 5.2 and 6.1. |
| Tha an taisbeanadh ro shoilleir/dorcha. | Feumaidh suidheachadh an dimmer atharrachadh. | Press the SNOOZE/DIMMER button (when alarm is not sounding) to cycle through brightness levels. |
9. Sònrachaidhean
- Modail: SPC106X
- Brand: biorach
- Dath: Dubh
- Seòrsa taisbeanaidh: LED didseatach
- Dath taisbeanaidh: Gorm
- Meud taisbeanaidh: 1.0 òirlich
- Feartan sònraichte: Alarm, Snooze, Dimmer
- Meudan toraidh: 2.2"W x 3.9"H (Note: The provided dimensions are for width and height, depth is not specified but implied by the compact design)
- Stòr cumhachd: Electrical Operation (AC powered)
- Cùl-taic Bataraidh: Tha (Bataraidhean gun a bhith air an toirt a-steach)
- Seòrsa seòmar: Seòmar-cadail
- Seòrsa stàladh: Clàr-bùird
- Stuth frèam: Plastaig
- Cuideam nì: 9.6 unnsa
- Dèanadair: MZ Berger
- UPC: 049353612447
10. Barantas agus Taic
Barantas cuibhrichte
MZ Berger & Company warrants to the original consumer purchaser of this product that it shall be free of defects in material and workmanship for one year from the purchase date. This warranty does not cover damage resulting from tampering, improper use, unauthorized modification, or misuse. This warranty is limited to repair or replacement of the product at MZ Berger's discretion.
To obtain warranty service, you must include a Proof of Purchase (sales receipt or photocopy) and a check or money order for USD $5.00 to cover the cost of handling. Also include your return address and a brief description of the issue. Ship the clock, postage ro-phàighte, chun t-seòladh gu h-ìosal:
Ionad Seirbheis MZ Berger
29-76 Ceann a Tuath Boulevard
Cathair Long Island, NY 11101
Seirbheis teachdaiche
Please call Toll Free at 1-(800)-221-0131 for customer service assistance. Available Monday-Friday, 9:00 AM - 4:00 PM EST.
Please do not return the clock to the store without first contacting customer service.