1. Ro-ràdh
This manual provides essential information for the safe and efficient operation of your InFocus IN112 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.
The InFocus IN112 is designed for versatile use, offering high brightness and a strong contrast ratio. It incorporates BrilliantColor technology for clear image reproduction and is 3D-ready. Its compact and lightweight design facilitates easy portability and installation.
2. Dè tha sa bhogsa
Dearbhaich gu bheil na nithean uile a tha air an liostadh gu h-ìosal air an toirt a-steach ann am pasgan an toraidh agad:
- InFocus IN112 Projector
- Corda cumhachd
- RGB cable (VGA cable)
- A/V cable (Composite Video cable)
- Stiùireadh sàbhailteachd
- Leabhar-làimhe cleachdaiche (an sgrìobhainn seo)
- Smachd iomallach
3. Proiseactair Tharview

Figear 1: Mullach View - Displays the control panel with buttons for power, source selection, menu navigation, and keystone adjustment, along with the focus ring for the lens.

Figear 2: Taobh View - Shows the ventilation grilles essential for heat dissipation during operation. Ensure these are not obstructed.

Figear 3: Ceàrnach View le Iomallach - Illustrates the projector from an angle, highlighting the lens and the included remote control for convenient operation.

Figear 4: Cùl View - Details the various input and output ports, including power, audio in/out, video, computer (VGA), RS232, and Mini USB.
4. Suidhich
4.1 Suidheachadh
Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. The distance from the screen will determine the image size. Adjust the projector's position to achieve the desired image size and clarity.
4.2 Ceangal cumhachd
- Ceangail an càball cumhachd a tha air a thoirt seachad ri in-ghabhail cumhachd a’ phròiseictar.
- Plug ceann eile an t-sreang cumhachd a-steach do ionad dealain stèidhichte.
4.3 A’ ceangal stòran inntrigidh
The IN112 projector offers multiple input options:
- VGA (Computer In 1 & 2): Use the RGB cable to connect to a computer's VGA output.
- Bhidio iom-fhillte: Use the A/V cable to connect to devices with composite video output.
- S-Bhidio: Connect to devices with S-Video output.
- Fuaim a-steach: Ceangail stòran claisneachd taobh a-muigh le bhith a’ cleachdadh càball stereo 3.5mm.
- RS232C: For control and automation systems.
- USB B Mini: For control and firmware updates.
Ensure all cables are securely connected before powering on the projector.
5. Stiùireadh Obrachaidh
5.1 Cumhachd air / dheth
- Gus cumhachd a thoirt air adhart, brùth air an Cumhachd button on the control panel or remote control. The power indicator light will illuminate.
- Gus cumhachd a thoirt dheth, brùth air an iuchair Cumhachd button again. Confirm shutdown if prompted. Allow the projector to cool down before unplugging.
5.2 Atharrachadh Ìomhaigh
- Fòcas: Cuairtich fàinne fòcais lionsa a’ phròiseictar gus am bi an ìomhaigh geur agus soilleir.
- Clach-iuchrach: Cleachd an Clach-iuchrach buttons on the control panel or remote to correct trapezoidal image distortion if the projector is not perfectly perpendicular to the screen.
5.3 Taghadh Stòr
Brùth an Stòr button on the control panel or remote control to cycle through available input sources (VGA1, VGA2, Video, S-Video).
5.4 Stiùireadh Clàr
Brùth an Clàr-taice/Amach button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate and the Tagh or Cuir a-steach putan gus na taghaidhean a dhearbhadh. Brùth Clàr-taice/Amach a-rithist gus an clàr-taice a dhùnadh.
5.5 Modh Eco
Activate Eco Mode to extend lamp life and reduce power consumption. This mode is suitable for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode compared to 5,000 hours in normal mode.
5.6 3D Content Projection
The IN112 is 3D-ready. To project 3D content, you will need compatible 3D source material, a 3D-capable player, and active 3D glasses (sold separately). Refer to your 3D source device's manual for specific setup instructions.
6. Cumail suas
6.1 lamp Ath-chur
Am proiseactair lamp tha fad-beatha crìochnaichte aige. Nuair a bhios an lamp comharra (Temp/Lamp) illuminates or the image brightness significantly decreases, the lamp may need replacement. The lamp door is conveniently located on the top of the projector for easy access, even when installed.
Rabhadh: Ensure the projector is powered off and completely cooled before attempting lamp replacement. Refer to the detailed lamp replacement instructions in the full service manual for safety and proper procedure.
6.2 Glanadh
The IN112 projector is designed without filters, eliminating the need for filter cleaning or replacement. Periodically wipe the exterior casing with a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.
7. A ’dèanamh trioblaid
| Trioblaid | Adhbhar a dh’fhaodadh a bhith ann | Fuasgladh |
|---|---|---|
| Chan eil ìomhaigh air a thaisbeanadh | Power cable disconnected, incorrect input source selected, source device not powered on. | Check power connections. Press the Stòr button to select the correct input. Ensure the source device is on. |
| Tha an ìomhaigh blurry | Lionsa a-mach à fòcas. | Atharraich an fhàinne fòcas air lionsa an proiseactair. |
| Tha an ìomhaigh trapezoidal | Chan eil am proiseactair ceart-cheàrnach ris an sgrion. | Cleachd an Clach-iuchrach buttons to correct the image shape. |
| Colors appear incorrect or dull | Color settings require adjustment. | Access the OSD menu and navigate to image settings to adjust color, brightness, and contrast. |
| Bidh am proiseactair a’ teasachadh cus agus a’ dùnadh sìos | Ventilation obstructed, high ambient temperature. | Ensure clear airflow around the projector. Operate in a well-ventilated area. |
8. Sònrachaidhean
| Feart | Mion-fhiosrachadh |
|---|---|
| Modail Àireamh | IN112 |
| Teicneòlas taisbeanadh | DLP with BrilliantColor |
| Fuasgladh Dùthchasach | SVGA (800 x 600) |
| Gile (ANSI Lumens) | 2700 (2200 in Eco Mode) |
| Co-mheas coimeas | 3000:1 |
| Lamp Life (Average) | 5,000 hours (Normal), 6,000 hours (Eco Mode) |
| 3D deiseil | Tha |
| Ceangalachd | 2x VGA In, Composite Video, S-Video, 3.5mm Stereo In, RS232C, USB B Mini |
| Meudan toraidh | 13 x 5.5 x 12.5 òirleach |
| Cuideam nì | 4.78 not (2.17 kg) |
| Cànan Obrachaidh | Sasannach |
9. Barantas agus Taic
9.1 Barantas toraidh
The InFocus IN112 projector is backed by a comprehensive warranty:
- Barantas cuibhrichte 5-bliadhna air an proiseactair.
- Barantas iomlan 2-bliadhna a’ còmhdach phàirtean agus saothair.
- Barantas 6 mìosan air an lamp.
Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official InFocus warranty documentation or visit the InFocus weblàrach.
9.2 Taic Teicnigeach
For technical assistance, troubleshooting, or service inquiries, please contact InFocus customer support. Contact information can typically be found on the InFocus official weblàrach-lìn no anns na sgrìobhainnean a tha air an toirt a-steach.
10. Related Product Information (IN130 Series)
The following video provides an overview of features found in the InFocus IN130 Series projectors. While specific models may vary, many core functionalities and design principles are shared across InFocus projector lines, offering general insight into InFocus projector capabilities.
Video: InFocus IN130 Series Overview - This video highlights features such as HDMI + Power for streaming sticks, high brightness, vivid colors, long lamp life, 3D readiness, and various connectivity options. Note: This video is for the IN130 series, but demonstrates general InFocus projector features.