Tetra 4004218188785

Tetra WP Aquarium Water Pump for 80-200 Liter Aquariums

Modail: 4004218188785

1. Ro-ràdh agus Os a chionnview

The Tetra WP Aquarium Water Pump is designed to provide efficient water circulation for aquariums ranging from 80 to 200 liters. This powerful, submersible pump features an adjustable flow system, ensuring optimal water movement for a healthy aquatic environment. Its compact design allows for easy placement and quiet operation, making it an ideal choice for maintaining water quality.

Am measg nam prìomh fheartan tha:

  • Powerful Impeller System: Delivers high water flow for effective circulation.
  • Ìre sruth a ghabhas atharrachadh: Allows precise control over water movement to suit your aquarium's needs.
  • Gu tur fon uisge: Designed for complete immersion in water.
  • Obrachadh sàmhach: Engineered to run silently, minimizing disturbance.
  • Stàladh agus cumail suas furasta: Simple setup and straightforward cleaning procedures.

2. Stiùireadh Sàbhailteachd

Before operating the Tetra WP Aquarium Water Pump, please read and understand all safety instructions to prevent injury or damage to the product or your aquarium. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • Dì-cheangail an solar cumhachd an-còmhnaidh mus dèan thu obair-chàraidh, stàladh no toirt air falbh sam bith den phump.
  • Ensure your hands are dry when handling the power plug.
  • The pump is designed for indoor use only and must be fully submerged in water during operation.
  • Na obraich am pumpa ma tha an càball cumhachd no am pluga millte.
  • Do not use the pump for purposes other than those specified in this manual.
  • Cùm a-mach à ruigsinn chloinne.
  • Dèan cinnteach gu bheil an voltage indicated on the pump matches your local power supply.

3. Pasgan-susbaint

Fosgail am bogsa gu faiceallach agus dèan cinnteach gu bheil a h-uile rud ann agus ann an deagh staid. Bu chòir am pasgan a bhith a’ gabhail a-steach:

  • 1 x Tetra WP Aquarium Water Pump (Model WP 600)

Note: Additional tubing or accessories may need to be purchased separately depending on your specific aquarium setup.

4. Suidhich

Follow these steps for proper installation of your Tetra WP Aquarium Water Pump:

  1. Ullaich am Pumpa: Ensure the pump is clean and free from any debris.
  2. Suidheachadh: Place the pump fully submerged inside your aquarium. The pump is equipped with suction cups for secure attachment to the aquarium glass. Ensure it is positioned where it can effectively circulate water without being obstructed by decorations or substrate.
  3. Connect Tubing (Optional): If you are using the pump to drive a filter or other accessory, connect the appropriate tubing to the pump's outlet nozzle.
  4. Atharraich an ìre sruth: Locate the flow adjustment slider on the pump. Set it to the desired water flow intensity. Start with a moderate setting and adjust as needed after observing your aquarium's water movement.
  5. Ceangal cumhachd: Once the pump is securely placed and fully submerged, connect the power plug to a suitable electrical outlet.
Tetra WP Aquarium Pump submerged in an aquarium with white gravel and rock decorations.
Image: The Tetra WP pump positioned at the bottom of an aquarium, demonstrating its submersible nature and compact size.
Tetra WP Aquarium Pump generating a strong stream of bubbles in an aquarium, indicating water circulation.
Image: The pump actively circulating water, visible by the stream of bubbles it produces, ensuring proper aeration and movement.

5. Obrachadh

Once installed, operating the Tetra WP pump is straightforward:

  • Cumhachd air: Plug the pump into a power outlet. The pump will start immediately.
  • Atharrachadh srutha: Use the green slider on the front of the pump to increase or decrease the water flow. Adjust it to achieve the desired current for your fish and plants.
  • Gnìomh leantainneach: The pump is designed for continuous operation. Monitor your aquarium's water parameters and fish behavior to ensure optimal conditions.

6. Cumail suas

Regular maintenance ensures the longevity and efficient performance of your pump. Always disconnect the power before performing any maintenance.

  1. Glanadh àbhaisteach: Periodically remove the pump from the aquarium. Disassemble the front cover and impeller housing. Clean the impeller and its chamber thoroughly to remove any accumulated debris, algae, or mineral deposits. A small brush can be helpful.
  2. Thoir sùil airson bacaidhean: Inspect the intake grilles and outlet nozzle for any blockages that might impede water flow.
  3. Sgrùdadh Impeller: Check the impeller for any signs of wear or damage. A worn impeller can lead to reduced performance or increased noise.
  4. Ath-chruinneachadh: Reassemble the pump carefully, ensuring all parts are correctly fitted.

For optimal aquarium health and filter performance, consider using products like Tetra FilterActive Bacteria after filter changes, filter cleaning, or water changes. This helps maintain biological activity and extends the interval between cleanings.

Bottle of Tetra FilterActive Bacteria with fish and filter media shown on the label.
Image: Tetra FilterActive Bacteria, recommended for maintaining filter performance and water quality.

7. A ’dèanamh trioblaid

If you encounter issues with your Tetra WP pump, refer to the following common problems and solutions:

TrioblaidAdhbhar a dh’fhaodadh a bhith annFuasgladh
Chan eil pumpa a 'tòiseachadhNo power; Impeller jammed; AirlockCheck power connection; Disconnect and clean impeller; Ensure pump is fully submerged and free of air bubbles.
Lùghdachadh air sruthadh uisgeClogged intake/outlet; Dirty impeller; Flow rate set too lowClean intake grilles and outlet; Clean impeller; Adjust flow slider to a higher setting.
Tha am pumpa fuaimneach no a’ crithImpeller dirty or damaged; Improper seating of components; Air trapped in pumpDisconnect and clean impeller; Ensure all parts are correctly assembled; Gently shake pump to release trapped air; Check for worn impeller.
Bidh pumpa a 'stad bho àm gu àmOverheating; Loose connection; Impeller obstructionEnsure pump is fully submerged; Check power connection; Clean impeller for obstructions.

8. Sònrachaidhean

Detailed technical specifications for the Tetra WP 600 Aquarium Water Pump:

FeartSònrachadh
ModailWP 600
Meud freagarrach airson an aquarium80 - 200 liotair
Ìre sruth as àirde600 Liters per hour (l/h)
Caitheamh cumhachd11 watt
An àirde lìbhrigidh as àirde1.3 meters (m)
Maximum Immersion Height1 meter (m)
Meudan (Mu thuairmse)Àirde: 80 mm, Doimhneachd: 70 mm, Leud: 50 mm
StuthMeatailt (co-phàirtean a-staigh), Plastaig (taigheadas)
Stòr cumhachdElectric with cable
GTIN (Àireamh Nì Malairt Cruinneil)04004218188785
ASINB004AWF0TA
Dùthaich TùsAn Eadailt
Diagram showing the dimensions of the Tetra WP 600 pump: 80mm height, 70mm depth, 50mm width.
Image: Approximate dimensions of the Tetra WP 600 pump.
Table comparing specifications of Tetra WP 300, WP 600, and WP 1000 models, including aquarium size, flow rate, power consumption, max delivery height, and max immersion height.
Image: Comparison table of Tetra WP pump models, highlighting the WP 600 specifications.

9. Barantas agus Taic

The Tetra WP Aquarium Water Pump comes with a Barantas 2-bliadhna bho cheann-latha a’ cheannaich, a’ còmhdach lochdan saothrachaidh. Cùm dearbhadh do cheannaich airson tagraidhean barantais.

For returns or issues with defective/damaged products, please refer to the retailer's return policy or contact their customer support directly. For specific information regarding purchases made on marketplaces, consult their respective help pages.

For technical support or further inquiries about your Tetra product, please visit the official Tetra weblàrach-lìn no cuir fios chun roinn seirbheis teachdaiche aca.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.