Legrand On-Q Surge-Protected Duplex Power Kit (Model 36456902V1)

1. Os a chionnview

The Legrand On-Q Surge-Protected Duplex Power Kit (Model 36456902V1) provides a convenient and secure solution for delivering power and surge protection to equipment within structured wiring enclosures, wall installations, and other compatible setups. This kit is designed to safeguard sensitive electronics from voltage spikes while offering a tamper-resistant outlet for enhanced safety.

Image 1.1: The Legrand On-Q Surge-Protected Duplex Power Kit, showing the complete product assembly.

2. Fiosrachadh Sàbhailteachd

Please read and understand all instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• RABHADH: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installing or servicing.
• Feumaidh dealanach teisteanasach an stàladh a dhèanamh a rèir a h-uile còd dealain nàiseanta is ionadail.
• Do not install in wet locations or where excessive moisture may be present.
• Dèan cinnteach gu bheil a h-uile ceangal uèirleas tèarainte agus air a chòmhdach gu ceart.
• Tha an inneal seo airson a chleachdadh a-staigh a-mhàin.
• Do not exceed the electrical ratings of the device (15 Amps, 125 Volts).

3. Clàr-innse Kit

Dèan cinnteach gu bheil na pàirtean uile an làthair mus tòisich an stàladh:

• Surge-Protected Duplex Outlet
• Old-Work Electrical Box
• Clàr-balla
• Sgriubha stàladh

Image 3.1: This image shows the components included in the kit: a surge-protected outlet, an old-work electrical box, and a wall plate.

4. Feartan

• Built-In Surge Protection: Safeguards connected devices with integrated surge protection, ideal for powering and protecting equipment in structured wiring enclosures. Provides 340 Joules of surge protection and 24kA Max Surge Capability.


Image 4.1: This image illustrates the surge protection capabilities, including 340 Joules of surge protection and 24kA Max Surge Capability.

• Audible Alarm with ON/OFF: An integrated audible alarm alerts users to surge protection status. A switch allows the alarm to be turned on or off.

Image 4.2: This image highlights the audible alarm feature with an ON/OFF switch on the outlet.
• Surge Protection LED Indicator: A visual LED indicator provides immediate status feedback:
  • Steady GREEN = Protected
  • Flashing RED = Not Protected
  • OFF = No Power to Unit


Image 4.3: This image explains the Surge Protection LED Indicator: steady green for protected, flashing red for not protected, and off for no power.

• TampDealbhadh neo-sheasmhach: Ensures safety by preventing accidental insertion of foreign objects into the outlet slots.
• Stàladh ioma-chruthach: Compatible with On-Q and other enclosures featuring standard outlet knockouts, or can be used as a standard wall outlet.
• Seasmhach & Earbsach: Air a thogail le stuthan àrd-inbhe airson coileanadh maireannach.
• Additional Wiring Flexibility: Features 2 back wire holes for easier wiring.

Image 4.4: This image details the outlet's specifications, including removable ears, child-safe tamper-resistant shutters, 2 back wire holes, and 15A 125Volt 60Hz cULus listing.

5. Stàladh

Follow these steps for proper installation of the Legrand On-Q Surge-Protected Duplex Power Kit:

5.1. Ullachadh

1. Cumhachd dì-cheangail: Turn off power at the main circuit breaker or fuse box before starting any electrical work. Verify power is off using a voltage deuchainniche.
2. Tagh Àite: Choose a suitable location within your structured wiring enclosure or wall for the power kit.
3. Remove Knockouts: If installing in an enclosure, use a utility knife and hammer to carefully remove the desired electrical knockouts for the power kit.

5.2. Wiring and Mounting

4. Install Electrical Box: Insert the provided old-work electrical box into the prepared opening. Use the provided screws to affix the box securely to the enclosure or wall stud.
5. Sreangadh slighe: Route the AC cabling (hot, neutral, ground) into the electrical box.
6. Terminate AC Cabling: Connect the AC wires to the surge-protected duplex receptacle. Ensure proper polarity (hot to brass screw, neutral to silver screw, ground to green screw). Tighten all terminal screws firmly.
7. Gabhadan Beinn: Carefully push the wired receptacle into the electrical box. Screw the receptacle into the box using the provided mounting screws.
8. Stàlaich Wall Plate: Attach the wall plate over the receptacle and secure it with the provided screws.

Image 5.2: This image shows a diagram illustrating how the power kit is compatible with standard knockouts on both metal and plastic media enclosures.

Image 5.3: This image shows the installed power kit inside an enclosure, providing power and surge protection to networking equipment.

6. Obrachadh

Once installed and power is restored, the Legrand On-Q Surge-Protected Duplex Power Kit operates automatically to provide power and surge protection.

6.1. Surge Protection Indicator

Observe the LED indicator on the outlet for its status:

• Steady GREEN: Indicates that the surge protection is active and functioning correctly.
• RED a' lasadh: Indicates that the surge protection has been compromised or is no longer providing protection. The outlet will still provide power, but connected devices are no longer protected from surges. Replacement of the unit is recommended.
• OFF: Indicates no power is supplied to the unit. Check the circuit breaker or wiring connections.

6.2. Inneal-rabhaidh claisneachd

The audible alarm will sound if the surge protection is compromised (flashing RED LED). Use the ON/OFF switch located on the outlet to silence or activate the alarm as needed.

7. Cumail suas

The Legrand On-Q Surge-Protected Duplex Power Kit requires minimal maintenance. Regular checks are recommended to ensure continued protection.

• Sgrùdadh lèirsinneach: Periodically inspect the outlet and wiring for any signs of damage, wear, or loose connections.
• Sgrùdadh comharra LED: Regularly check the LED indicator to ensure it is steady green, indicating active surge protection. If it is flashing red, the surge protection has been expended, and the unit should be replaced.
• Glanadh: Clean the surface of the outlet and wall plate with a soft, dry cloth. Do not use abrasive cleaners or solvents.

8. A ’dèanamh trioblaid

If you encounter issues with your Legrand On-Q Surge-Protected Duplex Power Kit, refer to the following troubleshooting guide:

9. Sònrachaidhean

Image 9.1: This image provides detailed dimensions of the surge-protected duplex outlet, including its length, width, and depth behind the strap.

10. Barantas agus Taic

10.1. Fiosrachadh Barantais

This Legrand On-Q product is covered by a warranty for 12 mìosan bhon cheann-latha ceannach. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the official warranty documentation provided with your product or contact Legrand On-Q customer service.

10.2. Taic teachdaiche

For technical assistance, troubleshooting, or warranty claims, please contact Legrand On-Q customer support. Contact information can typically be found on the product packaging or the official Legrand On-Q weblàrach.

When contacting support, please have your product model number (36456902V1) and date of purchase readily available.