Perel E305DIN1

Perel E305DIN1 DIN Rail Week Timer Instruction Manual

Model: E305DIN1

1. Ro-ràdh

This manual provides detailed instructions for the installation, operation, and maintenance of your Perel E305DIN1 DIN Rail Week Timer. Please read this manual thoroughly before using the device to ensure proper function and safety. The Perel E305DIN1 is designed for precise daily and weekly control of electrical circuits.

2. Feartan

The Perel E305DIN1 DIN Rail Week Timer offers a range of functionalities for efficient time management of electrical devices:

  • Prògramadh làitheil agus seachdaineil: Allows for flexible scheduling across days and weeks.
  • 8 ON/OFF Program Locations: Configure up to 8 distinct ON and OFF switching times.
  • Taisbeanadh LCD: Clear display of time, day of the week, and current operating status.
  • NiMH Backup Battery: Integrated battery provides up to 200 hours of autonomy after a full charge, preserving settings during power outagtha.
  • 3-Way Manual Override: Easily switch between ON, OFF, and AUTO modes manually.
  • Roghainnean stàlaidh: Designed for DIN rail mounting or wall mounting using the included bracket.
  • Còmhdach dìon follaiseach: Provides protection for the display and controls.

3. Setup agus Stàladh

Rabhadh: Installation should only be performed by a qualified electrician. Ensure the main power supply is disconnected before commencing installation.

3.1 Stàladh

The E305DIN1 timer can be mounted in two ways:

  • Stàladh rèile DIN: Snap the timer onto a standard 35mm DIN rail within an electrical enclosure.
  • Stàladh balla: Use the provided bracket to secure the timer to a wall. Ensure the mounting surface is stable and capable of supporting the device.

3.2 Ceangal Dealain

Refer to the wiring diagram provided with the device for specific connection points. General steps include:

  1. Connect the main power supply (220-250VAC, 50Hz) to the designated input terminals.
  2. Connect the load (device to be controlled) to the output terminals. Ensure the load's specifications do not exceed the timer's maximum output capacity (16A resistive, 8A inductive).
  3. Double-check all connections for tightness and correctness before restoring power.
Perel E305DIN1 DIN Rail Week Timer with transparent cover

Image: Perel E305DIN1 DIN Rail Week Timer. This image shows the front view of the timer, highlighting its LCD display, control buttons, and transparent protective cover.

4. Stiùireadh Obrachaidh

After installation and power-up, the timer's internal battery will charge. Allow sufficient time for the battery to charge for optimal backup functionality.

4.1 A’ suidheachadh an Àm agus an Latha Làithreach

  1. Brùth an CLOC putan.
  2. Fhad 'sa tha e a' cumail CLOC, brùth an LATHA putan gus latha gnàthach na seachdain a shuidheachadh.
  3. Fhad 'sa tha e a' cumail CLOC, brùth an UAIR putan gus an uair làithreach a shuidheachadh.
  4. Fhad 'sa tha e a' cumail CLOC, brùth an MIN putan gus a’ mhionaid làithreach a shuidheachadh.

4.2 Prògramadh Amannan AIR/DHÈTH

The timer allows for up to 8 ON/OFF program pairs.

  1. Brùth an PROG button once to enter program mode. The display will show '1 ON'.
  2. Cleachd an LATHA, UAIR, agus MIN buttons to set the desired ON time for program 1.
  3. Brùth PROG a-rithist. Seallaidh an taisbeanadh '1 OFF'.
  4. Cleachd an LATHA, UAIR, agus MIN buttons to set the desired OFF time for program 1.
  5. Repeat steps 1-4 for programs 2 through 8.
  6. Brùth an CLOC button to exit program mode and return to normal operation.

4.3 Gnìomh Sàr-làimhseachaidh Làimhe

The manual override function allows you to temporarily change the timer's output state without affecting programmed settings.

  • Brùth an LAOIDH putan airson rothaireachd tro na modhan:
  • AIR: The output is continuously ON, overriding any programmed OFF times.
  • OFF: The output is continuously OFF, overriding any programmed ON times.
  • AUTO: The timer operates according to the programmed ON/OFF schedules.

5. Cumail suas

The Perel E305DIN1 timer requires minimal maintenance.

  • Glanadh: Sguab an taobh a-muigh le clò bog, tioram. Na cleachd innealan-glanaidh sgrìobach no fuasglaidhean.
  • Cùl-taic Bataraidh: The internal NiMH battery is designed for long life. If the timer frequently loses its settings during power outages, the battery may need replacement by a qualified technician.
  • Suidheachaidhean Àrainneachdail: Ensure the timer operates within its specified temperature range (-10°C to 40°C) and avoid excessive humidity or direct sunlight.

6. A ’dèanamh trioblaid

If you encounter issues with your Perel E305DIN1 timer, refer to the following common problems and solutions:

  • Chan eil an timer a’ tionndadh AIR/DHÈTH mar a chaidh a phrògramadh:
    • Thoir sùil a bheil an timer a-staigh AUTO mode. If it's in ON or OFF manual override, it will ignore programs.
    • Verify that the programmed ON/OFF times are correctly set and correspond to the current day.
    • Ensure the current time and day are accurately set on the timer.
  • Tha an taisbeanadh bàn no a’ priobadh:
    • Check the main power supply to the timer.
    • If power is present, the internal backup battery might be completely discharged. Allow the timer to be powered for several hours to recharge the battery.
  • Timer loses settings after power outage:
    • The internal NiMH backup battery may not be fully charged or may be at the end of its lifespan. Ensure the timer is continuously powered for at least 24 hours to fully charge the battery. If the issue persists, the battery may need replacement.
  • Time drift (timer becomes inaccurate over time):
    • The timer has a specified accuracy of ±1 minute per month. Minor adjustments may be necessary periodically. If the drift is significantly higher, contact support.

Mura rèitich na ceumannan seo an duilgheadas, cuir fios gu taic luchd-cleachdaidh.

7. Sònrachaidhean

Below are the technical specifications for the Perel E305DIN1 DIN Rail Week Timer:

Solar cumhachd220 ~ 250VAC / 50Hz
Toradh (Luchd-strì an aghaidh)16A @ 230VAC, max. 3680W
Toradh (Luchd Ion-ghluaiseach)8A @ 230VAC (cos µ = 0.4)
Minimum Switching Interval1 mhionaid
Caitheamh cumhachd4.4W
Teòthachd Obrachaidh-10 ° C gu 40 ° C
Cruinneas ùine± 1 mionaid gach mìos
Bataraidh cùl-taicNiMH, up to 200h autonomy
A' cur suasDIN Rail or Wall Mount
StuthPlastaig
Dathfollaiseach

8. Barantas agus Taic

This Perel product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the Perel customer service department.

Cùm do chuidhteas ceannach mar dhearbhadh ceannach airson adhbharan barantais.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.