Leabhar-làimhe Cleachdaiche Stèisean Aimsir Technoline WS 6810

1. Toradh thallview

The Technoline WS 6810 amber Weather Station is a sophisticated device designed to provide accurate indoor and outdoor temperature readings, precise timekeeping via DCF-77 radio control, and convenient alarm functions. Its modern design with a warm amber LED display and black high-gloss finish integrates seamlessly into any contemporary home environment. This manual provides detailed instructions for setting up, operating, and maintaining your weather station.

Figear 1.1: Aghaidh view of the Technoline WS 6810 Weather Station, displaying indoor and outdoor temperatures, current time, and alarm indicators.

2. Pasgan-susbaint

Thoir sùil gheur air susbaint a’ phacaid. Ma tha rud sam bith a dhìth no air a mhilleadh, cuir fios chun neach-reic agad sa bhad.

• 1 x Technoline WS 6810 Temperature Station (Main Unit)
• 1 x TX96 (TW004) Outdoor Sensor
• 1 x Power Supply Unit (220V)
• 1 x Leabhar-làimhe Cleachdaiche (an sgrìobhainn seo)

Thoir an aire: 3 x AAA Micro LR03 batteries for main unit backup and 2 x AAA Micro LR03 batteries for the outdoor sensor are nach eil air a thoirt a-steach agus feumar a cheannach air leth.

Figure 2.1: The Technoline WS 6810 main unit alongside its TX96 outdoor sensor.

3. Prìomh fheartan

• DCF-77 Radio-Controlled Clock: Automatic time synchronization for precise timekeeping. Includes manual setting option and time zone adjustment (± 1 hour).
• Indoor and Outdoor Temperature Display: Monitors and displays current temperatures for both indoor and outdoor environments.
• Cuimhne Teothachd Min / Max: Records and displays the highest and lowest temperatures measured.
• Dual Alarm Clocks: Two independent alarms (ALM1, ALM2) with adjustable settings.
• Dreuchd Snooze: Provides a temporary pause for alarms, typically 5 minutes.
• Soilleireachd taisbeanaidh atharrachail: Two brightness levels for optimal visibility in various lighting conditions.
• Seas clàr: Integrated stand for convenient desktop placement.
• Taisbeanadh LED: Clear, warm amber LED digits for easy readability.

4. Stiùirich rèiteachaidh

4.1. Cumhachd a thoirt don Phrìomh Aonad

1. Connect the provided power supply unit to the DC IN port on the back of the WS 6810 main unit.
2. Plug the power adapter into a standard 220V electrical outlet. The display will illuminate.
3. Airson cumhachd cùl-taice rè na h-ùine a-muightages, insert 3 x AAA Micro LR03 batteries (not included) into the battery compartment on the back of the main unit, observing polarity (+/-).

4.2. Installing Batteries in the Outdoor Sensor (TX96)

1. Open the battery compartment on the back of the TX96 outdoor sensor.
2. Insert 2 x AAA Micro LR03 batteries (not included), ensuring correct polarity.
3. Dùin an roinn bataraidh gu tèarainte.

4.3. Initial Synchronization and Sensor Placement

1. Place the outdoor sensor within effective transmission range (typically up to 30 meters in open air) of the main unit. Avoid placing it near large metal objects, electrical appliances, or direct sunlight.
2. The main unit will automatically attempt to receive the DCF-77 radio signal for time synchronization and connect with the outdoor sensor. This process may take several minutes. A signal icon will appear on the display once synchronization is successful.
3. If the outdoor temperature does not appear after a few minutes, press the "SENSOR" button on the main unit to manually initiate a search for the outdoor sensor.

4.4. Time Zone Setting (if required)

If you are in a region where the DCF-77 signal's standard time differs from your local time (e.g., outside Central European Time), you may need to adjust the time zone.

1. In normal time display mode, press and hold the "SET" button until the time zone offset flashes.
2. Use the "+" or "-" buttons to adjust the time zone offset in ±1 hour increments.
3. Press "SET" again to confirm and exit.

Figear 4.1: Mullach view of the WS 6810, highlighting the control buttons for setup and operation.

5. Stiùireadh Obrachaidh

5.1. Fiosrachadh Taisbeanaidh

The large LED display shows the following information:

• ANN: Teòthachd a-staigh.
• A-mach: Outdoor temperature (from TX96 sensor).
• Uair: Current time (radio-controlled).
• ALM1 / ALM2: Indicators for Alarm 1 and Alarm 2.
• An ìomhaigheag chomharran: Indicates successful DCF-77 signal reception.
• MIN / MAX: Indicators for minimum and maximum temperature records.

5.2. A ’suidheachadh innealan-rabhaidh

The WS 6810 features two independent alarms (ALM1 and ALM2).

1. Press the "ALARM" button repeatedly to cycle through ALM1, ALM2, and normal time display.
2. When ALM1 or ALM2 is displayed, press and hold the "ALARM" button until the alarm time flashes.
3. Use the "+" or "-" buttons to adjust the hour, then press "ALARM" to confirm and move to minutes.
4. Use the "+" or "-" buttons to adjust the minutes, then press "ALARM" to confirm.
5. To activate/deactivate an alarm, select ALM1 or ALM2 display, then press the "+" button. An alarm icon will appear/disappear.

5.3. Gnìomh Snooze

When an alarm sounds, press the "SNOOZE/LIGHT" button to activate the snooze function. The alarm will temporarily stop and sound again after approximately 5 minutes.

5.4. Atharrachadh Soilleireachd an Taisbeanaidh

Press the "SNOOZE/LIGHT" button (when no alarm is sounding) to toggle between the two available brightness levels for the LED display.

5.5. Viewing Min/Max Temperatures

Press the "MIN/MAX" button to cycle through the current, maximum, and minimum recorded indoor and outdoor temperatures. To reset the min/max records, press and hold the "MIN/MAX" button while the min/max values are displayed.

6. Cumail suas

• Glanadh: Sguab am prìomh aonad agus an sensor a-muigh le clò bog, tioram.amp aodach. Na cleachd luchd-glanaidh sgudail no solventan.
• Ath-nuadhachadh bataraidh: Replace batteries in the outdoor sensor and main unit (for backup) when the low battery indicator appears on the display or when performance degrades. Always replace all batteries of a set at the same time.
• Suidheachadh mothachaidh: Periodically check the outdoor sensor's placement to ensure it is protected from direct sunlight and heavy precipitation for accurate readings and longevity.
• Stòradh: Ma tha thu a’ stòradh an inneil airson ùine mhòr, thoir air falbh na bataraidhean uile gus casg a chur air aodion.

7. A ’dèanamh trioblaid

8. Sònrachaidhean Teicnigeach

9. Barantas agus Taic

Technoline products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please contact your retailer or visit the official Technoline weblàrach.

Duilleag Oifigeil Bathar: http://www.technoline.eu/products/en/4029665068107

Feuch an glèidh thu an dearbhadh ceannach agad airson tagraidhean barantais.