Broan-NuTone 66V Three-Function Wall Control

1. Ro-ràdh

This manual provides detailed instructions for the installation, operation, and maintenance of your Broan-NuTone 66V Three-Function Wall Control. This wall control is designed to manage the functions of compatible Broan-NuTone fans and heaters, offering precise control over fan speed and heat levels. Please read these instructions carefully before installation and use to ensure safe and efficient operation.

The Broan-NuTone 66V is a 120V, 20 amp control featuring three independent rocker switches. It is compatible with Broan-NuTone fans and heaters within the specified amprangachadh erage.

2. Fiosrachadh Sàbhailteachd

RABHADH: Gus an cunnart bho theine, clisgeadh dealain no dochann do dhaoine a lughdachadh, thoir sùil air na leanas:

• Always disconnect power at the service panel before installing or servicing this control. Lock out the service panel to prevent power from being turned on accidentally.
• All electrical work must be performed by a qualified electrician in accordance with all applicable codes and standards, including fire-rated construction codes and standards.
• Do not use this control with any device that exceeds its specified electrical ratings (120V, 20 amp).
• Faodaidh ceimigean a bhith anns an toradh seo a tha aithnichte do Stàit California a dh’ adhbhraicheas aillse agus lochdan breith no cron gintinn eile. Nigh làmhan an dèidh làimhseachadh.

3. Pasgan-susbaint

Dèan cinnteach gu bheil na pàirtean uile an làthair mus tòisich an stàladh:

• Broan-NuTone 66V Three-Function Wall Control (Ivory)

4. Setup agus Stàladh

The Broan-NuTone 66V wall control is designed to fit a standard single-gang electrical opening. Ensure you have adequate space within the electrical box for wiring connections.

Dealbh 1: Aghaidh view of the Broan-NuTone 66V Three-Function Wall Control. This image shows the three independent rocker switches and the ivory finish of the control panel.

1. Cumhachd dì-cheangail: Before starting any electrical work, turn off the power to the circuit at the main service panel. Verify that power is off using a voltage deuchainniche.
2. Ullaich Uèirleadh: Carefully remove the existing wall plate and switch, if applicable. Identify the wires for your fan and heater unit. The 66V control uses screw-type terminals for secure connections.
3. Ceangail uèirichean: Connect the appropriate wires from your electrical box to the corresponding terminals on the back of the 66V wall control. Ensure all connections are tight and secure. Refer to the wiring diagram provided with your fan/heater unit for specific connections.
4. Mount Control: Gently push the connected wires into the electrical box. It is recommended to use a deep electrical box to accommodate the wiring for three switches. Secure the wall control to the electrical box using the provided screws.
5. Stàlaich Wall Plate: Attach the decorative wall plate over the installed control.
6. Thoir air ais cumhachd: Turn the power back on at the service panel.

5. Stiùireadh Obrachaidh

The Broan-NuTone 66V wall control features three independent rocker switches, each designed to control a specific function of your connected Broan-NuTone fan or heater unit.

• Gnìomh suidse: Each rocker switch operates independently. Press the top of the rocker switch to turn the connected function ON, and press the bottom to turn it OFF.
• Function Assignment: The specific function controlled by each switch (e.g., fan, light, heater) depends on how the unit was wired during installation. It is recommended to label each switch for clarity.
• Smachd mionaideach: Use the individual switches to select desired fan speeds or heat levels as supported by your connected Broan-NuTone appliance.

6. Cumail suas

The Broan-NuTone 66V wall control requires minimal maintenance.

• Glanadh: To clean the surface of the wall control, wipe it with a soft, damp clò. Na cleachd innealan-glanaidh sgrìobach, fuasglaidhean, no ceimigean cruaidh, oir faodaidh iad sin milleadh a dhèanamh air a’ chrìochnachadh.
• Sgrùdadh: Periodically inspect the wall control for any signs of damage or loose connections. If any issues are observed, disconnect power and consult a qualified electrician.

7. A ’dèanamh trioblaid

If you experience issues with your Broan-NuTone 66V wall control, consider the following:

• Gun chumhachd don inneal: Ensure power is restored at the service panel. Check all wire connections at the wall control and the connected appliance for tightness.
• Switch Not Functioning: Verify that the connected appliance is operational and not experiencing its own issues. Recheck wiring connections.
• Tight Fit in Electrical Box: If the control is difficult to install due to wire congestion, consider replacing the existing electrical box with a deeper one to provide more space for wiring.
• Cùisean Seasmhach: If problems persist after checking these points, disconnect power and consult a qualified electrician or Broan-NuTone customer support.

8. Sònrachaidhean

9. Barantas agus Taic

For information regarding product warranty, please refer to the warranty documentation included with your original purchase or visit the official Broan-NuTone website. For technical assistance, replacement parts, or further inquiries, please contact Broan-NuTone customer support through their official channels.