Westek 6043BC Touch Pad Dimmer Instruction Manual

Ro-ràdh

The Westek 6043BC Touch Pad Dimmer is designed to convert any standard incandescent lamp into a touch-controlled dimmable lamp. This device allows you to easily adjust the light output with a simple touch, offering three levels of illumination. It is compatible with incandescent bulbs up to 200 Watts. This manual provides detailed instructions for safe installation, operation, and maintenance of your touch pad dimmer.

Feartan toraidh

Touch Light Control: Simply touch the pad to turn the light on or change the illumination level.
Soilleireachd a ghabhas atharrachadh: Offers three distinct light settings, ranging from a low night light to full brightness.
Dealbhadh goireasach: Works with incandescent bulbs up to 200 Watts, eliminating the need for specialized 3-way bulbs.
Stoidhle Ùr-nodha: Features a contemporary black finish and sleek design that complements various home decors.
Stàladh furasta: Designed for simple plug-in functionality to add dimmer capabilities to your existing table or floor lamps.

Fiosrachadh Sàbhailteachd

Leugh agus tuig a h-uile stiùireadh mus stàlaich thu agus mus cleachd thu e. Cùm an leabhar-làimhe seo airson fiosrachadh san àm ri teachd.

Airson cleachdadh a-staigh a-mhàin.
Na bi nas àirde na an wat as àirdetage of 200 Watts for incandescent bulbs.
Dèan cinnteach gu bheil an lamp is unplugged from the wall outlet before installation.
Avoid using with LED or CFL bulbs unless specifically rated as dimmable and compatible with touch dimmers. Incompatible bulbs may flicker or be damaged.
Do not use this dimmer control with another dimmer in the same circuit.
Cùm air falbh bho uisge agus taiseachd.

Stàladh agus stàladh

Follow these steps to install your Westek 6043BC Touch Pad Dimmer:

Ullaich an L.amp: Dèan cinnteach gu bheil do lamp is unplugged from the wall outlet. Replace the existing light bulb with a standard incandescent bulb (up to 200 Watts).
Ceangail an Dimmer: Plug an lamp's power cord into the receptacle on the Westek 6043BC dimmer unit.
Plug a-steach don ionad-balla: Plug the dimmer unit into a standard wall outlet.
Position the Touch Pad: Place the touch pad in a convenient location. The touch pad is designed to detect contact with any metallic conductive surface, which then controls the lamp. Ensure the touch pad wire is not pinched or damaged.

Back of Westek 6043BC packaging showing installation diagram

Figure 1: Installation diagram from product packaging. Shows how to connect the lamp to the dimmer and the dimmer to the wall outlet, along with the touch pad connection.

Westek 6043BC Touch Pad Dimmer main unit with plug

Figure 2: The main dimmer unit, which plugs into the wall and accepts the lamp's plug.

Westek 6043BC Touch Pad Dimmer touch pad

Figure 3: The circular touch pad component, which is used to control the lamp.

Stiùireadh Obrachaidh

Once installed, operate the dimmer as follows:

Turn On/Adjust Brightness: Lightly touch the metal touch pad. The lamp will cycle through three brightness levels: low, medium, and high.
Tionndaidh dheth: After the high brightness setting, touching the pad again will turn the lamp dheth.
Cumhachd Outage: Ma tha cumhachd agadtage, the dimmer may reset. Simply touch the pad to resume normal operation.

Cumail suas

The Westek 6043BC Touch Pad Dimmer requires minimal maintenance. Ensure the unit and its connections are kept clean and dry. Do not attempt to open or repair the unit yourself, as this may void the warranty and pose a safety risk.

Fuasgladh thrioblaidean

Trioblaid	Adhbhar a dh’fhaodadh a bhith ann	Fuasgladh
Lamp does not turn on or dim.	Lamp not properly plugged into dimmer. Dimmer not properly plugged into wall outlet. Lamp's internal switch is off. Incompatible bulb (LED/CFL). bulb lochtach. Thoir cumhachd dhuttage no briseadair cuairte air a thilgeil a-mach.	Dèan cinnteach lamp cord is fully inserted into the dimmer. Ensure dimmer is fully inserted into a working wall outlet. Tionndaidh an lamp's original switch to the ON position. Replace with a standard incandescent bulb (up to 200W). Cuir an àite am bulb. Check your home's power supply and circuit breakers.
Lamp priobadh no buzzadh.	Incompatible bulb (LED/CFL). Ceangal bulb sgaoilte.	Replace with a standard incandescent bulb (up to 200W). Dèan teannachadh air a 'bholg anns a' phòcaid aige.
Lamp turns on by itself occasionally.	Electrical interference (e.g., during thunderstorms, power fluctuations).	This can be normal behavior during electrical disturbances. Simply touch the pad to turn it off.

Sònrachaidhean

Modail: 6043BC
Brand: Westek
Modh Obrachaidh: ON-NONE-OFF (3-level dimming)
Wat as àirdetage: 200 Watts (Incandescent bulbs only)
Voltage: 120V, 60 Hz
Modh smachd: Suathadh
Meudan nì (L x W x H): 3.9 x 1 x 7.9 òirleach
Cuideam nì: 3.8 Unns
Stuth: Multi (Brass contact material)
Dath: Dubh
Cleachdadh a-staigh a-mhàin: Tha

Barantas agus Taic

The Westek 6043BC Touch Pad Dimmer comes with a limited warranty. For specific warranty details, please refer to the product packaging or contact Westek customer support. For technical assistance or further inquiries, please visit the official Westek weblàrach-lìn no cuir fios chun roinn seirbheis teachdaiche aca.

Dèanadair: AmeirTac

Seirbheis teachdaiche: 201.661.9945

Weblàrach: www.amertac.com