Progress Lighting P5607-31 Traditional Outdoor Wall Lantern User Manual

1. Fiosrachadh Sàbhailteachd Cudromach

Leugh agus tuig a h-uile stiùireadh mus tòisich thu air an stàladh. Mura dèan thu sin dh’ fhaodadh sin clisgeadh dealain, teine ​​no leòntan eile adhbhrachadh a dh’ fhaodadh a bhith marbhtach no milleadh seilbh adhbhrachadh.

• RABHADH: Cunnart clisgeadh dealain. Dì-cheangail an cumhachd aig a’ bhriseadair cuairte no am bogsa fiùs mus tèid a stàladh no a sheirbheiseachadh.
• Feumaidh a h-uile ceangal dealain a bhith a rèir chòdan ionadail, òrdughan, no Còd Dealain Nàiseanta (NEC). Bruidhinn ri dealanach teisteanasach mura h-eil thu eòlach air ceanglaichean uèirleadh dealain ceart.
• Cleachd ceanglaichean uèir a tha air an liostadh le UL/cUL a-mhàin.
• This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm (Proposition 65 warning). Wash hands after handling.

2. Toradh thallview

The Progress Lighting P5607-31 is a traditional 1-light outdoor wall lantern featuring clear flat glass and a textured black finish. It is designed for outdoor use, providing illumination for porches, patios, and other exterior areas.

Figear 2.1: Aghaidh view of the Progress Lighting P5607-31 outdoor wall lantern in textured black with clear glass.

Figear 2.2: Line drawing illustrating the design of the P5607-31 outdoor wall lantern.

3. Setup agus Stàladh

3.1 Susbaint a’ phacaid

Verify that all components are present before beginning installation. The package typically includes the fixture, mounting hardware, and an installation sheet.

3.2 Ro-stàladh

1. Cuir dheth an cumhachd aig a’ phrìomh bhriseadh-cuairt no am bogsa fiùs.
2. Fosgail an uidheam agus na pàirtean gu faiceallach.

3.3 A’ cur suas an tàmh-àirneis

This fixture is designed for wall mounting. Ensure the mounting surface is secure and can support the weight of the fixture.

1. Ceangail am bracaid sreap ris a’ bhogsa snaim a’ cleachdadh na sgriothan a chaidh a sholarachadh.
2. Ensure the bracket is level and securely fastened.

3.4 Ceanglaichean Dealain

Connect the fixture wires to the house wires according to the following:

• Ceangail an uèir dhubh bhon inneal-gleidhidh ris an uèir dhubh (teth) bhon bhogsa snaim.
• Ceangail an uèir gheal bhon inneal-gleidhidh ris an uèir gheal (neodrach) bhon bhogsa snaim.
• Ceangail an uèir talmhainn lom copar no uaine bhon inneal-gleidhidh ris an uèir talmhainn copar uaine no lom bhon bhogsa snaim.
• Secure all connections with UL/cUL listed wire connectors.

3.5 Securing the Fixture

1. Thoir gu faiceallach a h-uile uèir a-steach don bhogsa snaim.
2. Align the fixture with the mounting bracket and secure it using the provided screws or nuts.

3.6 Stàladh Bulb

This fixture uses one (1) 100-Watt maximum, medium base (E26) bulb. An A19 shape bulb is recommended for optimal appearance with the clear glass.

Figear 3.1: Bulb information indicating an E26 (Medium Base) bulb and recommending an A19 bulb shape for this fixture.

1. Screw the bulb into the socket until snug. Do not overtighten.
2. This fixture is dimmable when used with compatible wall dimmers and dimmable light bulbs.

3.7 Suidheachadh air a mholadh

For aesthetic balance, wall lanterns are often sized to be approximately 1/4 the height of the door they flank.

Figear 3.2: Example of wall lantern height recommendation: 1/4 of the door height. For a 96-inch door, a 24-inch fixture is suggested.

Figear 3.3: Illustration of outdoor wall lantern placement on a house, demonstrating appropriate sizing and spacing for garage and entryways.

4. Obrachadh

Once installed and power is restored, the fixture operates by a standard wall switch. If a compatible dimmer switch and dimmable bulb are used, the light output can be adjusted.

5. Cumail suas

5.1 Glanadh

Gus an inneal-gleidhidh a ghlanadh, cuir dheth an cumhachd agus sguab le clò bog,amp cloth. Do not use abrasive cleaners or solvents as they may damage the finish or glass.

5.2 Ath-chur Bulb

Before replacing the bulb, ensure the power is turned off at the circuit breaker. Allow the bulb to cool completely before touching. Replace with a new 100-Watt maximum, E26 base bulb.

6. A ’dèanamh trioblaid

• Chan eil solas a 'tionndadh air:
  • Check that the power is turned on at the circuit breaker.
  • Dèan cinnteach gu bheil am bulb air a sgriubha gu tèarainte a-steach don t-socaid agus nach eil e air a losgadh a-mach.
  • Dèan cinnteach gu bheil a h-uile ceangal dealain tèarainte.
  • Inspect for any defective electrical components or wiring.
• Fuse blows or circuit breaker trips:
  • Check for crossed wires or short circuits.
  • Dèan cinnteach gu bheil am bulb wattage does not exceed the fixture's maximum rating (100W).

7. Sònrachaidhean

Figear 7.1: Detailed dimensions of the P5607-31 fixture, showing a width of 4-9/16 inches and a height of 8-5/8 inches.

8. Fiosrachadh Barantais

Tha an toradh Progress Lighting seo còmhdaichte le Barantas Earranta 1-bliadhna. This warranty guarantees your satisfaction with the purchase and includes professional after-sales customer service support. For specific details regarding warranty claims or service, please refer to the original purchase documentation or contact Progress Lighting customer service.

9. Taic

For further assistance, technical support, or to inquire about replacement parts, please contact Progress Lighting customer service. Contact information can typically be found on the manufacturer's official weblàrach no air pacaigeadh an toraidh.